Difference Between RAM and ROM
Learn
the main differences between RAM and ROM. Random-access and Read-only
memories differ from each other in speed, volatility and uses etc.
For all those who use computers and other electronic devices, it is important to know the difference between RAM and ROM. If you understand this difference you will be able to better understand how a computer works. RAM and ROM both are different types of memory and they both store data in a computer. In this article, we will tell you about the main differences between these two memories, namely RAM and ROM.
Random Access Memory (RAM)
RAM is a type of memory which allows access to the stored data in any sequence and from any physical location within the memory. RAM can be read and written with new data. The main benefit of RAM is that it takes almost same time in accessing any data in it, irrespective of the location of data. This makes RAM a very fast memory. Computers can read from RAM very quickly and also they can write new data in RAM very quickly.
How does RAM look like?
Commercially available regular RAM chips can be easily plugged-in and plugged-out a computer’s motherboard. The following image shows the RAM chips.
Random Access Memory (RAM) chips.
Read Only Memory (ROM)
As the name suggests, data is written in ROM only once and permanently. After that, data can only be read by computers. Read only memory is often used to install the permanent instructions into a computer. These instructions will never change. ROM chips store the basic input/output system (BIOS) of a computer. The following image shows a commercially available ROM BIOS chip.
Read-only memory. ROM BIOD chip.
Difference between RAM and ROM
The following table lists the main differences between Random-access and Read-only memory.| RAM | ROM | |
|---|---|---|
| 1. | Stands for Randon-access Memory | Stands for Read-only memory |
| 2. | RAM is a read and write memory | Normally ROM is read only memory and it can not be overwritten. However, EPROMs can be reprogrammed |
| 3. | RAM is faster | ROM is relatively slower than RAM |
| 4. | RAM is a volatile memory. It means that the data in RAM will be lost if power supply is cut-off | ROM is permanent memory. Data in ROM will stay as it is even if we remove the power-supply |
| 5. | There are mainly two types of RAM; static RAM and Dynamic RAM | There are several types of ROM; Erasable ROM, Programmable ROM, EPROM etc. |
| 6. | RAM stores all the applications and data when the computer is up and running | ROM usually stores instructions that are required for starting (booting) the computer |
| 7. | Price of RAM is comparatively high | ROM chips are comparatively cheaper |
| 8. | RAM chips are bigger in size | ROM chips are smaller in size |
| 9. | Processor can directly access the content of RAM | Content of ROM are usually first transferred to RAM and then accessed by processor. This is done in order to be able to access ROM content at a faster speed. |
| 10. | RAM is often installed with large storage. | Storage capacity of ROM installed in a computer is much lesser than RAM |
When you open a program like Microsoft Word, the program is loaded from computer’s hard disk into the RAM.
